Contact about our Colorado Springs painting contractors

Colorado Springs Painting Contractors: Article About Interior Painting Tips

Avalanche Roofing & Exteriors: Reliable Colorado Springs Painter
Avalanche Roofing & Exteriors banner

A new coat of paint is one of the easiest and cheapest ways to spruce up the look of a house. Colorado Springs painting contractors use their expertise to help homeowners paint like the professionals. These tips will ensure the best outcome of a DIY painting project. Understanding application techniques and other skills used by painting pros will guarantee the process goes smoothly the first time.

Learning the proper way to use a paint roller is one of the most important techniques, according to many professional contractors. There are many large areas of a room such as the ceiling that require the use of a roller. To paint these areas properly, one must maintain a wet edge with the roller and work quickly before anything has a chance to dry. This is done by starting in a corner and rolling the entire height of the wall. Each stroke should move the coat further along the length and slightly overlap the previous stroke. Finally, keep the open end of the roller facing the new paint. This will ensure less pressure is placed on the wet paint thus fewer streaks occur.

Paint color is usually a bit different from one can to the next. This can be a problem if a new can is needed halfway through painting a wall.

A painter from Avalanche & Exteriors of Colorado Springs would be happy to answer any questions about water damage restoration or attic insulation.

The slight difference is very noticeable when seen side by side. To avoid this problem, professionals estimate how much paint a room or project will need and then they mix it all into one five-gallon bucket. This precaution ensures a smooth, even and identical coat of paint throughout the entire house.

Pros paint the trim, walls and ceiling in a certain order that lessens the amount of time and work. As the very first step, they'll coat the trim in all rooms and then let it dry for 24 hours. This step is important because it's far easier and faster to tape off the trim than it is to tape off the walls and ceiling. When painting the trim first, the paint can be put on quickly without worrying about getting it on the walls. After the trim has been covered, use painter's tape to protect it while the wall coat is applied. Once the entire room has been painted, pros cut the tape away rather than pulling it off in order to avoid removing paint as well.

Following these professional tips will help homeowners get the best result during a DIY painting project.

Contact Avalanche Roofing & Exteriors today

For your free estimate, please call us today at (719) 375-8028 or submit the form below.

Contact An Experienced Painting Contractor

click to call

click to submit form